|
|
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
 |
GO TO:
FLOOR, DECK & EPOXY PAGE - GO TO: CONCRETE COATINGS PAGE |
 |
| WOOD COATINGS - Primers, Sealers, Stains, Paints
and Clears |
 |
|
| 2585 |
SUPER
BLOCK™ |
High
Solids White (Tintable) Pigmented Interior and Exterior Primer, Stain Killer and Wood
Sealer. |
White
(Tintable) |
| Flat |
Click for More Details |
Data/MSDS |
|
| 5660 |
WOOD-TECH™
Semi-Transparent |
100%
Acrylic Semi-Transparent, Stain, Sealer & Preservative for Trim, Deck & Other Wood
Surfaces. |
Clear
Base |
| Satin |
Click for More Details |
Data/MSDS |
|
| 5675 |
WOOD-TECH™
Solid Color Stain & Sealer |
100%
Acrylic Solid Color, Full Body, Stain, Sealer & Preservative for Trim, Deck &
Other Wood Surfaces. |
Clear
Base |
| Satin |
Click for More Details |
Data/MSDS |
|
| 5695 |
WOOD-TECH™
Clear |
100%
Acrylic Clear Finish, Penetrating Stain, Sealer & Preservative for Trim, Deck &
Other Wood Surfaces. |
Clear |
| Satin |
Click for More Details |
Data/MSDS |
|
| 5840 |
ULTRATHANE-40™ |
Industrial
100% Urethane 40% Solids Clear Sealer Finish. Excellent Durability & Chemical
Resistance. |
CLEAR |
| Gloss |
Click for More Details |
Data/MSDS |
|
| 5820 |
ULTRATHANE-20™ |
Commercial
100% Urethane 20% Solids Clear Sealer Finish. Excellent Durability & Chemical
Resistance. |
CLEAR |
| Gloss |
Click for More Details |
Data/MSDS |
|
| 9250 |
SKID-EX™ |
Anti-Skid,
Anti-Slip Additive for Reducing Slip & Skid in Clears, Stains, Paints and Floor
Coatings. |
Clear |
| Click Here for More Details |
Data/MSDS |
|
| 5725/50 |
WEATHER-GUARD™ |
Waterbased
Latex Enamel Industrial Finishes for Most Any Hard Surfaces. Great for Metal, Doors &
Trim. |
White/DB/CB |
| FLAT or SEMI-GLOSS - More
Details |
Data/MSDS |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
SUPER BLOCK™ INT-EXT WHITE PRIMER, STAIN KILLER & WOOD SEALER |
|
#2585-1 (1 Gallon)
#2585-5 (5 Gallon)
#2585-55 (55 Gallon) |
Data/MSDS |
| Superior Quality, High
Solids White (Tintable) Pigmented Interior and Exterior Primer, Stain Killer and Wood
Sealer. A High Solids Content Primer that comes standard in White, but can be tinted or
matched to most Pastel, White and Tint Base Colors. Effectively blocks and seals most
stains and bleedthrough including: water, lipstick, tobacco, nicotine, inks, crayons, wood
knots and sap streaks. SUPER BLOCK™ has excellent resistance to and sealing of tannin
stains. Provides a Sealed Surface for Paints or Coatings. Seals High pH Cementitious
Surfaces Eliminating the Waiting Period for Concrete, Cement, Mortar & Stucco to Cure.
Do not use on unprimed METAL surfaces; See METAL-PRIME RED-OX™
Primer. |
SPREAD
RATE: 300-400 square feet per gallon |
TECH DATA: Solids by Weight:
52% Solids by Volume:
46% Weight per Gallon: 10.2 lbs. |
|
|
WOOD-TECH™ SEMI-TRANSPARENT STAIN, SEALER & PRESERVATIVE |
|
#5660-1 (1
Gallon) #5660-5 (5 Gallon)
#5660-55 (55 Gallon) |
Data/MSDS |
| Superior
Quality 100% Acrylic Semi-Transparent, Trim & Deck Sealer and Finish Coating.
Effectively Penetrates & Protects Wood against Moisture, Rotting and Decay. Most
Semi-Transparent Wood Colors Available. |
SPREAD RATE: 200-350 square feet per gallon |
TECH
DATA: Solids by Weight: 27%
Solids by Volume: n/a Weight per
Gallon: 8.8 lbs. |
|
|
WOOD-TECH™ SOLID WOOD & DECK STAIN, SEALER &
PRESERVATIVE |
|
#5675-1 (1
Gallon) #5675-5 (5 Gallon)
#5675-55 (55 Gallon) |
Data/MSDS |
| Superior
Quality 100% Acrylic Semi-Transparent, Trim & Deck Sealer and Finish Coating.
Effectively Penetrates & Protects Wood against Moisture, Rotting and Decay. Most
Semi-Transparent Wood Colors Available. |
SPREAD RATE: 200-350 square feet per gallon |
TECH
DATA: Solids by Weight: 27%
Solids by Volume: n/a Weight per
Gallon: 8.8 lbs. |
|
|
WOOD-TECH™ CLEAR SEALER, PRESERVATIVE & CLEAR WOOD FINISH |
|
#5695-1 (1
Gallon) #5695-5 (5 Gallon)
#5695-55 (55 Gallon) |
Data/MSDS |
| Superior
Quality 100% Acrylic Clear Gloss, Trim & Deck Sealer and Finish Coating. Effectively
Penetrates and Protects Wood against Moisture, Rotting and Decay. |
SPREAD
RATE: 200-350 square feet per gallon |
TECH
DATA: Solids by Weight: 27%
Solids by Volume: n/a
Weight per Gallon: 8.8 lbs. |
|
|
ULTRATHANE-40™ 100% URETHANE 40% SOLIDS CLEAR GLOSS SEALER |
|
#5840-1 (1 Gallon)
#5840-5 (5
Gallon) #5840-55 (55 Gallon) |
Data/MSDS |
| High Performance
Industrial Grade 100% Urethane 40% Solids Clear Gloss Sealer Finish. Excellent Durability,
Gloss, U.V. Resistance and Excellent Chemical Resistance. Can be used on most any Interior
or Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces
must be Previously Sealed, Primed or Coated. Excellent for use on Properly Prepared HARD
WOOD Decks and Surfaces. Gas, Fuel, Oil and Chemical Containment Coating. |
SPREAD
RATE: 300-350 square feet per gallon |
TECH DATA: Solids by Weight:
40% Solids by Volume:
38% Weight per Gallon: 8.8 lbs. |
|
|
ULTRATHANE-20™ 100% URETHANE 20% SOLIDS CLEAR GLOSS SEALER |
|
#5820-1 (1 Gallon)
#5820-5 (5
Gallon) #5820-55 (55 Gallon) |
Data/MSDS |
| High Performance
Commercial Grade 100% Urethane 20% Solids Clear Gloss Sealer Finish. Excellent Durability,
Gloss, U.V. Resistance and Chemical Resistance. Can be used on most any Interior or
Exterior Coated or uncoated Substrates. Concrete, Masonry and Cementitious Surfaces must
be Previously Sealed, Primed or Coated. Great for use on Properly Prepared HARD WOOD Decks
and Surfaces. |
SPREAD
RATE: 300-350 square feet per gallon |
TECH DATA: Solids by Weight:
20% Solids by Volume:
19% Weight per Gallon: 8.5 lbs. |
|
|
SKID-EX™ CLEAR
SAND NON-SKID & NON-SLIP RESISTANCE ADDITIVE |
|
#9250-1 (8 ounces)
#9250-5 (40 Ounces) |
Data/MSDS |
| An Anti-Skid, Anti-Slip
Additive for use in most any Latex based Clear Coat, Paint or Stain. For Reducing Slip and
Skid on Slippery Coated Surfaces. This Product will help reduce slip but is NOT Guaranteed
to Eliminate Slipping or Falling. |
RECOMMENDED ADD LEVELS: 8 to 16 Ounces per Gallon - 40 to 80 Ounces per Five Gallons |
|
|
WEATHER-GUARD™ INTERIOR EXTERIOR LATEX ENAMEL PAINT |
| FLAT FINISH
#5725 -
SEMI-GLOSS FINISH #5750 |
|
#57xx-1 (1 Gallon)
#57xx-5 (5
Gallon) #57xx-55 (55 Gallon) |
Data/MSDS |
| Superior Quality
Waterborne Acrylic with Urethane Latex Enamel. Forms a Hard, Durable, Smooth Enamel Look
Flat or Semi-Gloss Finish with Excellent Durability, Gloss Retention & Abrasion
Resistance. For Most Interior or Exterior Surfaces including HARD WOODS & Metal.
Excellent for Doors and Trim. |
SPREAD
RATE: 150-300 square feet per gallon |
TECH DATA: Solids by Weight: 45%
Weight per Gallon: 10.4 lbs. |
|
|
|
|
|
-
      
-
NATIONWIDE's CONTACT INFORMATION:
Business Hours: (M-F 8am-5pm EST) |
Telephone: 941.753.7500 U.S.
Toll Free: 1.800.423.7264
Fax: 941.753.1773 (24 Hour Dedicated Fax) |
 |
NATIONWIDE
CHEMICAL COATING MFRS., INC. |
|
7106 24th Court East |
Sarasota,
Florida U.S.A. 34243 |
E-mail: info@natcoat.net
Directory of Sales Associates
Web: webmaster@natcoat.net |
| |
|
|
EXCLUSIVITY:
Some
Nationwide Products are sold Exclusively by Dealers and/or Distributors in Select Areas
and Regions. |
LEAKS:
Leaks
resulting from acts of providence, owner or their agents, are not the responsibility of NCCMI
and under no circumstances shall NCCMI
be liable in any respects to the building, it’s
occupants, it’s
contents or for any consequential or incidental damages. Leaks are required to be repaired
prior to the application of any coating and therefore are not covered under any warranty. |
| LABOR:
Products
Warranties are Limited to Material Only (see Limitations below), Labor is not included.
Nationwide does not Warranty for Labor of any Kind. |
| LIMITATIONS:
Any
implied warranty, including warranty of fitness for a particular use
or purpose, and warranty of merchantability, is limited in duration to the express
warranty based on the Individual Product's Warranty, unless a shorter period is
permitted
by law. If no Warranty is stated for a specific product then the maximum warranty will be
One Year from date of Purchase. If a Product has a specific Warranty and a Warranty was
not applied for using a Warranty Registration Certificate, the maximum warranty will be
One Year from Date of Purchase. NCCMI shall not be liable for incidental
or consequential damages or for damage to the building, it’s
contents, or it’s
occupants. NCCMI's
liability is limited to the
reasonable replacement cost of product that has been fully paid for and shall be limited
to defective product in the affected area only, whether any claim against it
is based upon strict liability, negligence, breach of warranty or any other theory or
cause of action. Venue in reference to any Product of Nationwide shall be Manatee County,
Florida, U.S.A. |
| DISCLAIMER:
Information
presented on this Web Page or any other Web Page on Nationwide Chemical Coating Mfrs.,
Inc. Web Site has been compiled by sources to be reliable, and is accurate and reliable to
the best of our knowledge and belief, but is not guaranteed to be so. |
|
Copyright
©1998-2009 NATIONWIDE CHEMICAL
COATING MFRS., INC. |
|
| www.nationwidecoating.com -
www.nationwidecoatings.net
- www.natcoat.net
- www.acrylocoat.com |
This Page was last updated on
Sunday, November 30, 2008 |
|
